Our lenses come from the world leaders in CO2 laser optics; II-VI INFRARED.
20mm diameter.
This lens is specially made for the FabCore.
If you need more ways to hold material in your Nomad, this is for you.
The Threaded Table is approximately 1/2″ thick and contains over 50 M6x1 threaded holes in it.
12 times a linear metre of colored fabric (various colors) and 2 linear metre of felt.
The Nomad Flip Jig allows you to cut both sides of a part while maintaining perfect alignment.
The Flip Jig is precision machined to mount to the Nomad 3 table. It uses the built-in machine calibration to make it easy to locate it on the table (no edge finders required).
The Flip Jig is made to hold stock that’s just under 3″x5″ …
€96,00 excl. VAT
Dimensions: 500 x 300 x 3 mm
6 clear acrylic sheets and six colored acrylic sheets (opal, yellow, red, blue, green and black).
| Weight | 6 kg |
|---|---|
| Dimensions | 52 × 32 × 6 cm |
If you need more ways to hold material in your Nomad, this is for you.
The Threaded Table is approximately 1/2″ thick and contains over 50 M6x1 threaded holes in it.
Mount a wasteboard to your table if you need to cut flat stock without worrying about cutting though and ruining your table underneath. These wasteboards a made of 1/2″ MDF and have holes and countersinks premachined to make it easy to mount right to the Nomad 883 & Nomad Pro.
Embroider continuous border designs by using the border embroidery frame. No need to remove and rehoop, just use the clip system to open the frame, reposition fabric and continue embroidering.
Carbide3D makes this vise from scratch, in-house, specifically for the Nomad