BRM 100160

From 12.950,00 excl. btw

CO2 lasers cut and engrave with great precision and high speed many types of materials – from thick acrylate to paper.

Clear

Description

As standard, all BRM laser machines with servomotors are designed for stability in your end product. In addition, the laser tube is cooled with a closed and alarmed water cooling system. Accuracy of the operations is ± 0.1mm and the maximum running speed is between 800-1000mm/s.

The machines are supplied as a complete package as standard. This means that the machines include the following accessories:

  • In highest adjustable honeycomb & lamella table
  • 63.5 mm & 100 mm lens
  • Extraction system
  • Air compressor
  • Industrial water cooler
  • Rotation system
  • Professional software

Our laser machines are suitable for engraving and cutting many types of materials. From metal to plastic and from leather to glass.

Additional information

Weight 560 kg
Dimensions 218 × 152 × 105 cm
Current

100W, 150W

Specifications

Work area 1000x1600x230 mm
Weight 560 kg
Laser type Sealed CO2 laser tube
Laser power 100W / 150W
Dimensions of the machine 1520x2180x1050 mm

Software

Video

Acrylate
Acrylate is a material that is easy to cut, but also sensitive to scratches. That is why the protective film is left intact when cutting acrylics. Of the two types, the extruded version is the most suitable for laser cutting. After cutting, no post-processing is necessary with respect to the edges. These are just as clear finished as the acrylic itself. Furthermore, the fact that cracks are minimal is because the process is contactless. The laser does not put any pressure on the material during operation.

WOOD
It is possible to lasercut and laser engrave different types of wood. Factors that require extra attention in wood laser cutting are the oil content, the density and the moisture content of the wood to be cut. These factors reflect the status of the wood and affect the laser power that needs to be set before the process starts. More laser power is set for hardwood than for softwood. With the help of our lasers it is also possible to cut MDF. MDF is a wooden board that consists of wood fibers that have been finely ground and subsequently compressed by means of resins. The waste materials that are released during the process of wood laser cutting are harmful. That’s why all laser machines from BRM have an extraction system that immediately absorbs these substances. Our laser machines can, among other things, process the following types of wood: abachi, oak, ash, maple, solid wood, natural wood, softwood, hardwood, wood material, bamboo, balsa wood, mahogany, linden, beech, poplar, birch, beech, silver fir, Douglas fir , fir, pine, red beech, cherry tree, walnut, padouk, teak, cork, veneer, plywood, MDF and plywood.

LEATHER
The laser sublimates the learning surface. This means that during the laser cutting process the material melts and evaporates due to the energy of the laser beam. As a result, narrow and extremely accurate slots can be cut into the leather by using the laser technique.

With laser machines you can edit both natural and artificial leather. There are various processing options for leather, such as leather laser cutting and leather laser engraving. Please note that artificial leather often contains PVC. PVC can not be treated with a laser machine, because harmful gases can then be released.

GLASS
Laser cutting glass is not recommended. The heat of the laser beam quickly creates tension within the glass surface, which increases the chance of tearing. Glass cutting is therefore often done with water. It is possible to laser engrave glass.

Laser engraving of glass is matting the glass surface. Glass and bottles, round and conical objects, can be wedged into a special unit in the laser engraving machine for glass. The object to be processed rotates during the process.

Manual

Assembly and instruction manual (EN)

You may also like

You may also like…

  • Focus Lens

    If you are requiring extra fine engraving such as fonts below 8pts; we recommend the 1.5″ lens. A short focus lens has a smaller minimum spot size but spreads out more quickly after reaching the focus making them better for fine detail but not good for thick cutting. A long focus lens keeps the focus longer allowing for straighter edges …

  • Radiator Water Chiller

    This water chiller keeps the laser tube cool and is essential for repeatable professional cut and engraving quality.

  • Airpump AP-series

    New series high pressure air pumps. The air pumps have a compact size and a low power consumption. They have a low noise operation.

  • BRM Combined Filter

    Replacement filters for BRM Extractors

  • BRM Pre-Filters

    Replacement filters for BRM Extractors

  • BRM Extractor XXXL

    The ‘Best in Class’ high performance BRM Extractor XXXL has now been further enhanced with the introduction of the new operating system, combining a range of unique features into one compact unit.

  • BRM Extractor XXL

    BRM’s Extractor XXL laser fume extraction system is a mid to high end laser fume extraction system, which makes it ideal for heavy duty applications that generate large amounts of particulate and gaseous organic compounds.

  • BRM Extractor XL

    The ‘Best in Class’ high performance BRM Extractor XL has now been further enhanced with the introduction of the new operating system, combining a range of unique features into one compact unit.

  • BRM Extractor L

    The ‘Best in Class’ high performance BRM Extractor L has now been further enhanced with the introduction of the new operating system, combining a range of unique features into one compact unit.

  • BRM Extractor M

    The Best in Class high performance BRM Extractor M has now been further enhanced with the introduction of the new operating system, combining a range of unique features into one compact unit.

  • BRM Extractor S

    A compact and competitively priced fume extraction system for light duty laser marking, coding and engraving applications.