The Thubitherm is a high quality Flock film for textile printing which consists of artificial silk (standard colors) and polyamide (noen colors). The dusty structure gives an extra luxurious look to your textile.
This textile transfer film is suitable for various types of textiles such as cotton/polyester and can be used for printing on leisurewear, workwear and sportswear.
Temperature: 160 degrees
Time: 15 seconds
Pressure: 2.0 bar
The Tubitherm has a slightly sticky backing and can be cut by all current cutting plotters. We advise you to cut the foil with a 60 degree blade. After peeling, the textile transfer film should be applied by means of a transfer press.
The polyester backing should be removed cold after the transfer. After this we advise you to press the material for another 10 to 15 seconds, with the same settings.
Washable up to 60 degrees (Neon up to 40 degrees)
We advise you in any case to carry out a test on your own material.
The POLIFLOCK has a light self-adhesive backing that ensures that you can easily position the transfer on the surface to be printed.
Peel pen / Peel tweezers, to make peeling easy
Teflon coversheet, to prevent the textile from giving off to your heat plate
Teflon pillow, for optimizing your pressure (small irregularities)
Rubber mat, for optimizing your pressure (large unevenness)
Please note that the colors on this page may differ from reality. Always check your order against the color chart.